Skip to content
PRD-02Sheet 02 of 06

Spur & Ring Gears

Spur and ring gears, cut to the grade you specify.

External spur gears and internal ring gears from module 0.5 to 12, hobbed, shaped or ground, and measured on a gear tester before they leave.

Overview

The plainest gear, made properly.

We make spur gears, gear clusters and internal ring gears to customer drawings, singly or in batches of several thousand.

Internal teeth are shaped, external teeth hobbed, and where the grade calls for it both are ground after heat treatment. Every batch is checked for profile, lead and runout, and the chart goes in the box.

3D render of a steel spur gear meshed inside an internal ring gear
Fig. 1Spur & Ring Gears

Specification

Spec sheet

MakerTorvik Engineering Pvt. Ltd.
TitleSpur & Ring Gears
Part no.PRD-02
01Module
0.5 to 12
02Diameter
10 to 800 mm
03Quality
ISO 1328 grade 5 to 9
04Material
20MnCr5, 42CrMo4, EN8
05Hardening
Carburised, nitrided, induction
06Batch
1 to 5,000+
UnitsSI
ScaleNTS
Sheet02 of 06
NoteQuoted per part, from first article to volume supply.

Scope of supply

What we make

Grade on paper
Profile, lead and runout charted for every batch.
Internal teeth
Ring gears shaped in house, not sent out.
Finished after heat
Ground after hardening where distortion matters.
  1. 01External spur gears and gear clusters
  2. 02Internal ring gears for planetary stages
  3. 03Gear hobbing and gear shaping
  4. 04Profile grinding after heat treatment
  5. 05Through-hardened, carburised and nitrided
  6. 06Profile and lead modification
  7. 07Gear-tester report with every batch

Typical applications

Where these end up.

Planetary stages

Ring gears and planets for compact, high-ratio reducers.

Machine tools

Spindle and feed gearing where accuracy decides surface finish.

Compressors and blowers

Timing and drive gears for rotary machinery.

Quality, every batch

Shipped with the report to prove it.

  1. Dimensional reportMeasured results for every characteristic on the drawing, in-process and final.
  2. Material certificateThe certificate for the material used, traceable to the heat.
  3. First article reportA full first-article inspection report (FAIR) signed off before batch supply.
  • Drawings read to BS, ASME and ISO conventions
  • In-process and final inspection, SPC
  • Documented NCR and CAPA closure on every batch

Need gears cut to a drawing?

Send us a brief and we will design it. Send us a drawing and we will make it. Either way you get one team and one point of accountability.

Reference PRD-02 in your enquiry

Next partPRD-03Bevel Gear SetsBevel gear sets, lapped and supplied as a pair.