Skip to content
PRD-04Sheet 04 of 06

Worm Drives

Worm drives for high ratios in a small space.

Worm and wheel sets and complete worm reducers, with ground steel worms and centrifugally cast bronze wheels, for slow, high-ratio duty.

Overview

One stage, a high ratio.

We supply worm and wheel sets to drawing and complete single-stage worm reducers for lifting, indexing and slow conveying.

The worm is hardened and ground; the wheel is hobbed from centrifugally cast phosphor bronze. Both are cut to the same centre distance and run together before dispatch, so the set beds in quickly once fitted.

3D render of a steel worm shaft meshed with a toothed worm wheel
Fig. 1Worm Drives

Specification

Spec sheet

MakerTorvik Engineering Pvt. Ltd.
TitleWorm Drives
Part no.PRD-04
01Ratio
7:1 to 70:1
02Centre distance
40 to 250 mm
03Torque
Up to 4,500 Nm
04Worm
Case-hardened, ground
05Wheel
Phosphor bronze
06Output
Solid or hollow shaft
UnitsSI
ScaleNTS
Sheet04 of 06
NoteQuoted per part, from first article to volume supply.

Scope of supply

What we make

Compact ratio
Up to 70:1 in a single stage.
Self-locking option
Ratios that hold the load without a brake, where the duty allows.
Bedded in
Worm and wheel run together before they ship.
  1. 01Worm and wheel sets to drawing
  2. 02Single-stage worm reducers
  3. 03Ground, case-hardened steel worms
  4. 04Phosphor-bronze wheels, centrifugally cast
  5. 05Single- and multi-start worms
  6. 06Self-locking ratios on request
  7. 07Run together before dispatch

Typical applications

Where these end up.

Lifting and hoisting

Slow, high-torque drives for screw jacks and lifting tables.

Indexing

Rotary tables and turners where positions must hold.

Slow conveyors

Low-speed drives where a single stage saves space.

Quality, every batch

Shipped with the report to prove it.

  1. Dimensional reportMeasured results for every characteristic on the drawing, in-process and final.
  2. Material certificateThe certificate for the material used, traceable to the heat.
  3. First article reportA full first-article inspection report (FAIR) signed off before batch supply.
  • Drawings read to BS, ASME and ISO conventions
  • In-process and final inspection, SPC
  • Documented NCR and CAPA closure on every batch

Need a worm set or reducer?

Send us a brief and we will design it. Send us a drawing and we will make it. Either way you get one team and one point of accountability.

Reference PRD-04 in your enquiry

Next partPRD-05Racks & PinionsRacks and pinions for straight, repeatable travel.